Whenever you work on your desk, whether you’re in the office or at home, sometimes you look for something to put your attention to for a while, especially while thinking or coming up with ideas. This is the reason why many people tend to decorate their tables or workspaces with the things they love or things that can entertain them when they get tired. One example of this decoration is a sand picture art.
You are watching: How to make moving sand art pictures
A sand picture art is an unusual decoration and a classic desk distraction. It features two panels of glass with a small separation between them. They are filled with sand and water. When you flip the frame over, the gravity pulls the sand to the bottom, making interesting pictures and patterns. In each flip, you can get a unique picture.
It is also a good project to make if you are looking for something creative that you can do. If you want to know more about sand picture art, you’re in the right place. Today, we are giving you a guide to sand picture art.
See more: How To Open Door On Ford Focus Door Handle Wont Open From Outside
How to Make a Sand Picture Art
If you have time to spare and want to get creative, then making a sand picture art is perfect for you.
Materials:2 identical picture frames with glass¼ inch gasket materialSilicone aquarium sealantColored sand (at least 2 different colors)Distilled waterDuct tapeScissorsClean cotton clothFunnel with ¼ inch nozzle
Procedure:The first thing you need to do is take the back off each picture frame. You need to separate the glass from the other parts of the frame. After that, wipe down both sides of the glass, and put one glass on a flat table.Think of the design that you want to make. It can be mountains, oceans, or any shape that you like. Then, create a few sketches to plan. After finalizing the design, carve the shapes out of the rubber gasket material. Leave spaces between them so you can pour the sand through. Trim the gasket to make the lining for the outer edge of the glass. You also need to make shapes for the sand and water to flow around. Then, cut a 1-inch section out of the top of the gasket and set it aside.Get the silicone aquarium sealant and glue down the gasket pieces to one side of the glass and let it dry. Once it dries up, put some sealant on the other side of the gasket and glue it one the second pane of glass. Make sure that the seal is tight. The top of the glass should have a 1-inch opening. You can test the seal by pouring a bit of water into the opening. If it goes well, pour the water out.Next, measure out ¼ to ½ cup of each colored sand you are using. Through the funnel, pour the sand down the opening and in between the glass. Make sure that the edges of the glass are secure before pouring all the sand. If needed, add some sealant. After pouring all the sand in, pour in distilled water through the funnel and between the glass. After doing this, you should notice quickly if a hole is in the lining. If there is, drain out all the water, let the glass dry, and then secure the opening with a sealant.When the frame is almost filled with water, hold the panes in a vertical position using two stacks of books or similar items. If you wish, you can add more sand. Then, glue the 1-inch section of the gasket and let it dry. Add more sealant around its edges to cover the seal.You can also cut ¼ inch strips of duct tape to support the sealant. Put them to the edges of the glass. Then, glue the glass into the side of the frame using the sealant. When it dries, glue the other side of the glass into the other side of the frame. Polish the glass outside, and your sand picture art is ready.