A malfunctioning Black and also Decker trimmer deserve to throw a wrench in her yard work for the day. In numerous cases, her Black and also Decker trimmer’s auto-feed role will quit working if the heat is jammed, and you’ll need to replace it. Whether it it is in a jammed line or broken spring or spool, there room several fast fixes as soon as the auto-feed isn’t functioning on your Black and also Decker trimmer.


If you’re someone that cares around their yard, girlfriend know exactly how frustrating it can be once tools don’t work-related correctly. If your ago and Decker trimmer starts come malfunction, address the problem immediately. Holding turn off on finding a solution have the right to cause more issues within the weed eater and also cost friend time and also money.

You are watching: Black and decker weed eater stopped working

If her Black and also Decker trimmer’s auto-feed isn’t working, over there is most most likely a jammed line. This happens within the spool the the machine. If the heat doesn’t to the right the spool, the can reason the line to jam.

Table of Contents

Black and also Decker Trimmer ComponentsReasons Why your Black and also Decker Trimmer Auto-Feed Isn’t WorkingHow to replace the line on a Black and also Decker TrimmerRemove the Old Line and SpoolReplace the Old Line and Install the SpoolTypes the Trimmer LinesRelated Questions

Black and also Decker Trimmer Components

Before make the efforts to solve your auto-feed issue, girlfriend should know the machine.

Type of Weed Trimmer

An electric cord strength the earlier and Decker trimmer. The cord has actually systems in ar that prevents it from gift unplugged unintentionally. It also has lithium-ion batteries, practically for homeowners who don’t like the smell of exhilaration or gas-filled trimmers.

The fence of the Black and also Decker trimmer is the range of motion due to the power cord.

Size the Weed Trimmer

The Black and also Decker Trimmer is smaller contrasted to other electric weed trimmers. The trimmer’s purpose is to maintain your lawn’s appearance, therefore it’s lighter and also easier come handle.

Key components of a Weed Trimmer

The trimmer has actually a small head ~ above the string trimmer to preserve edging after ~ mowing and also reaching areas hard to trim. It’s 13 inch in diameter so that it have the right to maneuver right into hard-to-reach places. The head can likewise rotate 150 degrees, therefore after trimming her lawn, you can also edge.

The trimmer has a 4.4 ampere-motor. Friend should cut tall grass in a row before moving onto the following row to stop the blade breaking. Over there is an automatic feed spool feature, which reduces any type of vibrations during the cut process.

Reasons Why your Black and Decker Trimmer Auto-Feed Isn’t Working

The Black and Decker Trimmer uses a spring and a bump spool to feed out much more line automatically. Once you tap the head ~ above the ground, it releases the line. However, periodically the head can acquire covered v sap or dirt, leading to the trimmer come malfunction.

There are number of potential factors why your Black and also Decker trimmer isn’t working:

Jammed Line

If her trimmer isn’t working, it’s most frequently a jammed line. The line it s okay jammed follow me the spool, resulting in the auto-feed to stop working. Jams can take place when present overlap each other or if the line isn’t the correct diameter.

Dirty or difficult Spool

Another typical reason the trimmer isn’t functioning is that there is a dirty or sticky spool. The spool can come to be covered v sap, mud, or dirt. If over there is any kind of obstruction, the line will stick versus the plastic.

If you bang the head of the trimmer and nothing comes out, wash the spool with warm water and also dish detergent.

Broken Spool

If you an alert that your spool is damaged once cleaning it, you’ve probably found your problem. For the spool to spin effectively in the head, it can’t it is in cracked, bent, or broken in any way. If the is, the line will certainly not come out when you madness the head.

If you uncover you have actually a damaged spool, you will should replace it.

Broken Spring

There is a spring located underneath the spool. Sometimes it will come to be bent or shed its elasticity. Check the function of the spring by pushing the spool down versus it.

How to replace the line on a Black and also Decker Trimmer

If her Black and Decker trimmer heat becomes worn or broken over time, you can replace it.

Follow the procedures to replace the heat on her trimmer:

Remove the Old Line and also Spool

Step 1: turn the power Off to your Trimmer

Unplug your trimmer or eliminate the battery. This will certainly ensure the you don’t accidentally turn the trimmer on and also injure yourself.

Step 2: location the Trimmer ~ above a Stable work Area

Set the trimmer ~ above a table or workbench the is waist elevation so that you can quickly replace the parts.

Step 3: remove the cap on the Trimmer Head

Remove the cap that covers your line top top the trimmer. Utilizing your fingers, press in the tabs ~ above either side of the cap, climate lift increase to eliminate it. This will expose the spool underneath.

Step 4: eliminate the Spool indigenous the Cap

Turn the lid over to expose the line and spool. The two indentations top top the next of the lid will aid you organize the heat in place. Traction the line from the feet on the cap, climate wiggle the spool to cost-free it native the cap.

Step 5: eliminate the Old line from the Spool

Lift the old line from the eyelets that organize it in place and also pull the complimentary end that the line. This will remove the old string. Repeat this process on the other side. Save in mind to wear gloves for this procedure to stop brush burns.

Replace the Old Line and also Install the Spool

Step 1: subject the new Line right into the Spool Holes

Using a 2-millimeter diameter line, object the new line into the spool holes. You deserve to purchase this heat at a hardware store or indigenous the Black and also Decker website. Black and Decker also has pre-threaded spools available.

Step 2: Wind the Line roughly the Spool

Feed the line with the hole and then monitor the arrows come wind the line about the spool. Try not to overlap the spool so the it doesn’t obtain tangled. Instead, pave the line roughly the spool so that the line wraps next to itself, no over itself.

Most Black and also Decker assets are wrapped counter-clockwise yet refer to her user manual for particular instructions.

Step 3: secure the line to the Spool

After pack the line about the spool, leave 6 inches that slack. Reduced the line using gardening shears or sharp scissors. Then, put the overabundance line v the eyelets top top the spool to hold it in place.

Step 4: object the other Side that the Spool

Repeat the measures to wind and also secure the various other line onto the spool. Make certain to monitor the arrows together you space winding.

Step 5: put the Spool into the Cap

Line up the hole in the facility of the spool v the center of the cap. Gently push the spool ago into the cap. Once you hear a click, revolve the lid over and also shake it to ensure the spool is secure.

Step 6: Lace the Line with the Eyelets

Pull the overabundance line the end of the spool’s eyelets and push them into the eyelets ~ above the cap. Then ar the spool ago into the trimmer.

Step 7: placed the Cap earlier Into the Trimmer

Press under on the side tabs that the lid to fit right into the trimmer head. Lightly press down top top the cap till you listen a click.

Types of Trimmer Lines

There room several types of trimmer lines, and also using the wrong one have the right to make her gardening task difficult. The more thickness the line, the more workload it can handle. Due to the fact that trimmer lines come in various sizes, always refer to your owner’s hands-on to recognize the suitable diameter.

Round Trimmer Line

Round trimmer heat is ideal for trimming grass edges about the lawn after you mow it. Master who have actually smaller lawns generally use this line for their trimming needs. Round heat is versatile but strong enough to reduced grass and also thin weeds.

On the various other hand, a round line can often tear the grass blades due to the fact that of its absence of cutting edges.

Twisted Trimmer Line

Twisted trimmer line looks favor two piece of heat wrapped together. The objective of this heat is to help reduce breakage. The architecture of the line likewise gives that the capability to make a cleaner cut.

Homeowners usually use twisted trimmer lines for edging the lawn or tackling tougher weeds.

Edged Trimmer Line

The edged trimmer line is for cutting dense grass and also weeds. It deserve to be square-shaped, pentagon-shaped, or hexagon-shaped. Most commercial landscapers usage this line as result of its capability to trim all types of growth.

The line creates a clean cut and also makes it much more manageable because that the operator come trim quickly.

Serrated Trimmer Line

The serrated trimmer line has actually edges that develop a saw-like motion. It’s for cutting thick grass knives while leave a cleaner trim. The clean cut reduces the threat of the grass developing diseases and also promotes healthy grass growth.

Commercial landscapers likewise use this kind of line as it leaves a more professional trim.

Related Questions

How deserve to I do my trimmer heat last longer?

There are three key things to execute so that your trimmer lasts longer. Weed eating techniques, spool size, and the type of wire you use are crucial to boost the lifespan.Using a trimmer appropriately is the number one way to maintain the line. This will certainly ensure that the line lasts longer and also that the trimmer doesn’t end up being damaged.

Spool dimension is also important as not all spools space the same. If you need to replace the spool, follow certain guidelines for her trimmer. You can discover these accuse in her user manual.

The final thing to remember is always to usage the recommended form of string. Take into consideration the size, style, brand, and string length. Your user hands-on will additionally have these specifications.

What space the finest weed eater techniques?

If you want to make certain your line lasts longer and your landscaping project looks professional, follow this steps.

Always store your wire parallel come the ground, particularly when tapping the spool come feed an ext string. This avoids the string from hitting dust or rocks. Don’t overfeed the string by continuing to madness the trimmer head. This will cause you to operation out the string also quickly. Practice trying just to feed an ext string once you require it.

See more: Lenovo Flex 3-1130 Ram Upgrade, Product Overview

Your trimmer must let you recognize if other isn’t right. The hum that the trimmer will certainly let you know if it demands a new string. Pay fist to the sound, and it will stop you native wasting line.