Objectives

· Configure hostnames and IP addresses on 2 Cisco Internetwork Operating system (IOS) switches using the command-line user interface (CLI).· use Cisco IOS commands to point out or limit access to the device configurations.· usage IOS regulates to save the running configuration.· Configure two host gadgets with IP addresses.· Verify connectivity between the two PC end devices.

You are watching: 2.4.1.2 packet tracer - skills integration challenge

Scenario

As a recently hired LAN technician, your network manager has actually asked friend to show your capacity to configure a little LAN. Her tasks encompass configuring initial settings on two switches making use of the Cisco IOS and configuring IP resolve parameters on host tools to carry out end-to-end connectivity. You space to use two switches and two hosts/PCs on a cabled and powered network.

Requirements

· usage a console connection to accessibility each switch.· name ASw-1 and also ASw-2 switches.· use the R4Xe3 password for all lines.· usage the C4aJa secret password.· Encrypt every clear text passwords.· include the native warning in the message-of-the-day (MOTD) Banner.· Configure addressing for all tools according come the Addressing Table.· save your configurations.· Verify connectivity between all devices.

Note: Click Check Results to view your progress. Click Reset Activity to create a brand-new set that requirements. If you click on this prior to you complete the activity, every configurations will certainly be lost.

See more: Psalm 68:6 God Puts The Lonely In Families, Compare Translations For Psalms 68:6

Instructions:

The following information is for the Instructor variation only.This activity uses variables that space randomly created each time the task is open or the “Reset Activity” button is clicked. Back the tables listed below show an equipment names mapping to certain address schemes, the names and also addresses are not tied together. For example, a student could get the machine names presented in script 1 with the addressing displayed in script 2. In addition, one of three execution of the topology will be gift to the student.

Topology Isomorphs

Example


*

*

Switch>enableSwitch#configure terminalSwitch(config)#hostname ASw-1ASw-1(config)#line console 0ASw-1(config-line)#password xAw6kASw-1(config-line)#loginASw-1(config-line)#exitASw-1(config)#line vty 0 4ASw-1(config-line)#password xAw6kASw-1(config-line)#loginASw-1(config-line)#exitASw-1(config)#enable an enig 6EBUpASw-1(config)#service password-encryptionASw-1(config)#banner motd #warning#ASw-1(config)#interface vlan 1ASw-1(config-if)#ip resolve 10.10.10.100 255.255.255.0ASw-1(config-if)#no shutdownASw-1(config-if)#exitASw-1(config)#exitASw-1#copy running-config startup-config

Switch>enableSwitch#configure terminalSwitch(config)#hostname ASw-2ASw-2(config)#line console 0ASw-2(config-line)#password xAw6kASw-2(config-line)#loginASw-2(config-line)#exitASw-2(config)#line vty 0 4ASw-2(config-line)#password xAw6kASw-2(config-line)#loginASw-2(config-line)#exitASw-2(config)#enable secret 6EBUpASw-2(config)#service password-encryptionASw-2(config)#banner motd #warning#ASw-2(config)#interface vlan 1ASw-2(config-if)#ip resolve 10.10.10.150 255.255.255.0ASw-2(config-if)#no shutdownASw-2(config-if)#exitASw-2(config)#exitASw-2#copy running-config startup-config